JTL Integrated Machine provides a comprehensive range of
finishing services:
JTL’s facility has dedicated booths to perform blasting and coating processes in two separate controlled environments to ensure the highest quality results.
JTL’s uses various blast media such as silica-free sand, steel grit, coal slag, glass, or walnut shells to remove previous coatings or rust and create the desired roughness for proper coating adhesion. While silica-free sand remains most popular, several coating applications may call for a greater depth of grit which demands a blast media like coal slag to meet required specifications.
After blasting and before coating, JTL’s technicians ensure optimal surface preparation of the steel’s profile according to SSPC/NACE standards.When surfaces are blast-clean, an anchor pattern is used to measure the depth of peaks and valleys, confirming compliance with the coating manufacturer’s requirements.
Temperature, dew point and humidity level are extremely important factors to guarantee high-quality results. JTL’s technicians use a digital infrared thermometer to test the atmosphere for these characteristics before proceeding application.The paint and coating manufacturer will specify acceptable ranges that must be met to ensure desired appearance and a successful bond. This precision requires the use of a dual laser sighting instrument.
JTL’s blasting and coating department is experienced in a variety of coating types such as primer, standard enamels (both water-born and solvent-based), 2-part epoxies, various polyurethanes, and organic and inorganic zincs.Special coating requirements such as colour-matching, anticorrosion, fire resistance and various degrees of anti-slip coating can also be applied.
JTL’s technicians are skilled to perform a variety of application systems including airless and conventional air spraying depending on the viscosity of the coating and intricacy of the project.Airless spraying uses an electric pump to atomize medium to high viscosity coatings at high pressure and is best for high production speed and large surface efficiency. Conventional spraying uses clean pressurized air to atomize the paint and is ideal for low viscosity coating of small or complex parts.
857 Reuter Road, PO Box 325, Port Colborne, ON, L3K 5W1 Canada
© 2025, JTL Integrated Machine Ltd. All rights reserved.
